Philips HQC483/00 Directions For Use Manual page 9

Cleaning
Clean the appliance every time you have used it.
Do not use abrasives, scourers or liquids such as
alcohol, petrol or acetone to clean the appliance.
1 Make sure the appliance is switched off
and disconnected from the mains before
you start cleaning it.
C
2 Remove the comb attachment.
C
3 Push the middle part of the cutting unit
upwards with your thumb until it opens
and then pull it off the appliance.
Be careful that the cutting unit does not fall to the
floor.
C
4 Clean the cutting unit and the inside of the
appliance with the brush supplied.
C
5 Place the lug of the cutting unit into the
slot and push the unit back onto the
appliance.
6 Make sure you push the cutting unit back
until you hear a click.
ENGLISH
11