Advertisement
Eggtimer WiFi Switch Quick Reference Guide
To Connect: Connect with your device's WiFi to "WiFi_Sw_dddddd",
where "dddddd" is the unique 6-digit hex code for your WiFi Switch,
and the 8-digit passkey is the one on the package
(or displayed through the serial port at power-up)
To Turn ON/OFF: Enter the displayed validation code then click Submit
To Find Passkey: Connect USB-Serial cable:
Set your terminal program to 115,200/8/N/1
Turn it on... the SSID and Passkey will be displayed
To Connect to your Altimeter:
Specifications:
Input: 4V-16V, approx.. 85 mA (we recommend at least as 300 mAH 2S LiPo battery)
Output: Voltage: Same as input, 13A max. continuous
WiFi Module: Espressif/AI-Thinker ESP8266-12
FCC ID: 2ADUIESP-12
Range: Typically 30'; up to 100' under ideal conditions
Security: WPA2-PSK, AES encryption
Passkey: 100,000,000 possible combinations
4-digit changing validation code required to toggle power
BLACK: GND
WHITE: TX
GREEN: not used
(don't enter the space between the digits on the passkey, though!)
Connect your battery to the IN terminals:
"+" to "BATT +"
"-" to "BATT-"
Connect your Altimeter battery input to the OUT terminals:
"OUT+" to altimeter battery "+"
"OUT-" to altimeter battery "-"
Optional – Connect the deployment status (CHA/CHB) leads
See the guide for connections...
Advertisement
