Advertisement
__
Mount the 10 uF capacitors
Locate the two 10 uF capacitors, one on either side of the voltage regulator. Note that the two
different valued capacitors look almost identical and are unfortunately not marked... the 10 uF
capacitors are the ones that have one MORE (i.e. there are TWO 10 uF capacitors but only
ONE .1 uF capacitor), and they come in a clear plastic carrier (the other ones are in a paper
tape carrier). Solder them in place.
__
Mount the 10K resistors
Locate the nine 10K resistors (marked "103") on the board. Solder them in place.
Advertisement
