Philips HQC688/60 User Manual page 5

1
2
C
3
C
4
C
5
6
Replacement
A worn or damaged cutting unit should only be
replaced with an original Philips cutting unit.
1
C
2
Make sure the appliance is switched off
and disconnected from the mains before
you start cleaning it.
Remove the comb attachment.
Open the cutting unit.
Clean the cutting unit and the inside of the
appliance with the brush supplied.
Close the cutting unit.Push the cutting unit
until you hear a click.
Remove the old cutting unit.
Place the two lugs of the new cutting unit
into the guiding slots and push the unit
back onto the appliance.
ENGLISH
7