Advertisement
The Secure Touch Lock is a simple, easy-to-use TSA-approved fingerprint padlock. Users can open lock quickly and easily,
without a password.
Before fingerprints are saved, any fingerprint can open the Secure Touch Lock. Please read and follow complete
instructions before using lock.
CHARGING LOCK BATTERY (FULLY CHARGE BEFORE USING)
Lock shackle
A
GREEN
flashing light indicates a
Fingerprint
low battery; charge the lock.
sensor
1. Open the lock and press
fingerprint on pad for 3 seconds.
REGISTERING ADMINISTRATOR FINGERPRINT
The administrator fingerprint must be used to add or delete fingerprints from the Secure Touch Lock's memory.
1.Registered fingerprint
setting button
1. With no lights being
displayed, press
fingerprint on pad. A
BLUE
light will display.
TSA007 lock
Open the USB-C charge port cover and
cylinder
insert the USB-C cable (included). Connect
micro-USB
the USB-C cable to a power source.
Charging interface
CHECKING THE FINGERPRINT STATUS
If the lock displays a solid
light, the lock does not have an
administrator fingerprint stored.
2. Place the new administrator's finger
on the fingerprint pad. The
light will turn off and the lock will
BLUE
beep. The
light turn back on.
Repeat this process 9 more times.
STARTING
setting button
BLUE
After successfully entering
BLUE
the administrator fingerprint
10 times, the light will
2.Press the setting button after the red light is out.
display solid
lock will beep.
The light displays solid
GREEN
charging.
The light will turn OFF
when the lock is done
charging. Full charge
takes up to 1 hour.
If the lock alternates solid
RED
light, the lock already has an
administrator fingerprint stored.
RED
If a
accompanied by 4
beeps, the administrator
BLUE
and the
registration failed. Please
repeat the steps.
when the lock is
BLUE
and
light is displayed
Advertisement
