comwave SIP-T46S Quick User Manual

Using BLA Feature on the IP Phone
This section provides you with detailed information on using the SIP-T46S IP phone in a BLA
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
will change. For more information on line key LED indicators, refer to
3.
Hosted
You can do the following using the IP phone in a BLA scenario:
Yealink IP Phone SIP-T46S - Quick user Guide
the SIP-T46S IP Phone

Placing calls



Answering calls


Using the speakerphone
Place a call on hold

Using BLA Feature on the IP Phone
Retrieving a held call

Using the headset
Placing Calls
This section provides you with detailed information on using the SIP-T46S IP phone in a BLA
can also dial the number first, and then choose the way you want to speak to the other
PlacIng callS
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
. You can have one call or multiple calls on the bridged line.
will change. For more information on line key LED indicators, refer to
You can place a call in one of three ways:
3.
To place a call on the bridged line:
can also search and dial a contact from call history, local directory or remote phone book.
- Using the handset
- Using the speakerphone
You can do the following using the IP phone in a BLA scenario:
Do one of following:
more information, refer to Contact Management
Using BLA Feature on the IP Phone
- Using the headset
Placing calls
age 78. - Enter the desired number using the keypad when the phone is idle. Press

You can also dial the number first, and then choose the way
the Send soft key.
This section provides you with detailed information on using the SIP-T46S IP phone in a BLA
Answering calls

ng a call, you can alternate between Speakerphone, Headset, and Handset modes by you want to speak to the other party.
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
The phone will dial the entered number.
Place a call on hold

ing the Speakerphone key, the HEADSET key, or by picking up the handset.
will change. For more information on line key LED indicators, refer to
During a call, you can alternate between Speakerphone,
- Press the line key when the phone is idle to enter the dialing screen.
Retrieving a held call
Headset, and Handset modes by pressing the Speakerphone 
3.
all duration of the active call and far-site's information (name or phone number) are visible
Advanced Phone Features
Enter the desired number using the keypad and then press
key, the HEADSET key, or by picking up the handset. The call
Placing Calls You can do the following using the IP phone in a BLA scenario:
duration of the active call and far-site's information (name
key.
e LCD screen. In the figure below, the call to "1026" (the phone number: 1026) has lasted
or phone number) are visible on the LCD screen. In the figure
The phone will dial the entered number.
Placing calls
You can have one call or multiple calls on the bridged line.

conds. below, the call to "1026" (the phone number: 1026) has
lasted 15 seconds. Answering calls
To place multiple calls on the bridged line:

To place a call on the bridged line:
n using the SIP-T46S IP phone in a BLA
Place a call on hold

You can have more than one call on the bridged line. To place a new call where there is an active
Do one of following:
ED which associates with a bridged line
call on phone A, do one of the following on the phone A: Retrieving a held call

cators, refer to Icon Instructions on page
- Enter the desired number using the keypad when the phone is idle. Press
- Press or the Hold soft key. The original call is placed on hold.
the Send soft key.
Placing Calls
Press the New Call soft key to enter the dialing screen.
scenario:
The phone will dial the entered number.
You can have one call or multiple calls on the bridged line.
Enter the desired number using the keypad.
- Press the line key when the phone is idle to enter the dialing screen.
To place a call on the bridged line:
Press ,
Enter the desired number using the keypad and then press
Phone A will dial the entered number.
Do one of following:
key.
- Press the line key. The original call is placed on hold. The phone will dial the entered number.
- Enter the desired number using the keypad when the phone is idle. Press
the Send soft key.
Enter the desired number using the keypad.
To place multiple calls on the bridged line:
The phone will dial the entered number. Press ,
You can have more than one call on the bridged line. To place a new call where there is an active
Phone A will dial the entered number.
line. - Press the line key when the phone is idle to enter the dialing screen.
ace a call using the handset:
call on phone A, do one of the following on the phone A:
To place a call using the handset:
Enter the desired number using the keypad and then press
- Press or the Hold soft key. The original call is placed on hold.
1. Pick up the handset
Pick up the handset. key.
Press the New Call soft key to enter the dialing screen.
2. Enter the desired number using the keypad.
The phone will dial the entered number.
Enter the desired number using the keypad.
Enter the desired number using the keypad.
3. Press or the Send
the phone is idle. Press , , or
To place multiple calls on the bridged line:
Press ,
Press , , or the Send soft key.
You can have more than one call on the bridged line. To place a new call where there is an active
Phone A will dial the entered number.
call on phone A, do one of the following on the phone A:
# key is configured as a send key by default. You can also set the * key as the send key, or
- Press the line key. The original call is placed on hold.
the dialing screen.
Advanced Phone Features
Icon Instructions
PBX
Advanced Phone Features
To place a call using the hands-free (speakerphone) mode:
Icon Instructions
- With the handset on-hook, press
Advanced Phone Features
obtain a dial tone.
- Enter the desired number using the keypad.
on page 59 and Call History Management
- Press
- With the handset on-hook, enter the desired number using
the keypad. Press
Icon Instructions
To place a call using the headset,
,
do one of the following:
1. With the optional headset connected, press
to activate the headset mode.
- Press the line key to obtain a dial tone.
- Enter the desired number using the keypad.
Note
- Press
2. With the optional headset connected, press
to activate the headset mode.
, or the Send soft key.
,
- Enter the desired number using the keypad.
- Press
Note
The SIP-T46S IP phone can handle multiple calls at a time.
, or the Send soft key.
However, only one active call (the call that has audio
associated with it) can be in progress at any time, other
calls are placed on hold. The SIP-T46S IP phone can
handle a maximum of 50 calls at one time.
,
soft key.
, or the Send soft key.
Using BLA Feature on the IP Phone
on page
This section provides you with detailed information on using the SIP-T46S IP phone in a BLA
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
will change. For more information on line key LED indicators, refer to
3.
You can do the following using the IP phone in a BLA scenario:
Using BLA Feature on the IP Phone
Placing calls

Answering calls

This section provides you with detailed information on using the SIP-T46S IP phone in a BLA
Place a call on hold

scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
Retrieving a held call
will change. For more information on line key LED indicators, refer to 
- With the handset on-hook, enter the desired number using the keypad.
3.
on page
- With the handset on-hook, enter the desired number using the keypad.
Placing Calls
or the line key to
Press ,
You can do the following using the IP phone in a BLA scenario:
Press , , or the Send soft key.
You can have one call or multiple calls on the bridged line. To place a call using the headset:
Placing calls

To place a call using the headset:
To place a call on the bridged line:
Do one of the following:
or the Send soft key.
Answering calls
, , or

Do one of the following:
Do one of following: - With the optional headset connected, press
- With the handset on-hook, enter the desired number using the keypad.
Place a call on hold

- With the optional headset connected, press
or the Send
Press the line key to obtain a dial tone. or the Send soft key.
Press , ,
- Enter the desired number using the keypad when the phone is idle. Press
Retrieving a held call

Press the line key to obtain a dial tone.
on page
Enter the desired number using the keypad.
the Send soft key.
To place a call using the headset:
- With the handset on-hook, enter the desired number using the keypad.
Placing Calls Enter the desired number using the keypad.
Press , , or the Send soft key.
The phone will dial the entered number.
, or the Send soft
Do one of the following:
or the Send soft key.
Press , ,
Press , , or the Send soft key.
You can have one call or multiple calls on the bridged line. - With the optional headset connected, press
- Press the line key when the phone is idle to enter the dialing screen.
- With the optional headset connected, press
To place a call using the headset:
- With the optional headset connected, press
Enter the desired number using the keypad.
Enter the desired number using the keypad and then press
To place a call on the bridged line:
Press the line key to obtain a dial tone.
Enter the desired number using the keypad.
key.
Press , , or the Send soft key.
Do one of the following:
Do one of following:
Enter the desired number using the keypad.
Press , , or the Send soft key.
The phone will dial the entered number.
- With the optional headset connected, press
Press , , or the Send soft key.
Note
- Enter the desired number using the keypad when the phone is idle. Press
To permanently use the headset mode, refer to
To place multiple calls on the bridged line:
Press the line key to obtain a dial tone.
the Send soft key.
To permanently use the headset mode, refer to Headset Prior
or the Send soft key.
- With the optional headset connected, press
, , or
Enter the desired number using the keypad.
You can have more than one call on the bridged line. To place a new call where there is an active
The phone will dial the entered number.
The SIP-T46S IP phone can handle multiple calls at a time. However, only one active call (the call
Enter the desired number using the keypad.
Press call on phone A, do one of the following on the phone A: , , or the Send soft key.
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
The SIP-T46S IP phone can handle multiple calls at a time. However, only one active call (the call
- Press Press the line key when the phone is idle to enter the dialing screen. , , or the Send soft key.
that has audio associated with it) can be in progress at any time, other calls are placed on hold. The SIP-T46S IP phone can handle a maximum of 50 calls at one time.
- With the optional headset connected, press - Press or the Hold soft key. The original call is placed on hold.
Enter the desired number using the keypad and then press
The SIP-T46S IP phone can handle a maximum of 50 calls at one time.
Note
Enter the desired number using the keypad. Press the New Call soft key to enter the dialing screen.
To permanently use the headset mode, refer to
key. To place multiple calls:
, or the Send soft
To place multiple calls: Press Enter the desired number using the keypad. , , or the Send soft key.
The phone will dial the entered number.
You can have more than one call on your SIP-T46S IP phone. To place a new call during an active
, or the Send soft key.
Press ,
The SIP-T46S IP phone can handle multiple calls at a time. However, only one active call (the call
or the Send soft key.
You can have more than one call on your SIP-T46S IP phone. To place a new call during an active call, do one of the following:
, To place multiple calls on the bridged line: , or
To permanently use the headset mode, refer to Headset Prior
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
Phone A will dial the entered number.
call, do one of the following:
- Press the line key. The active call is placed on hold.
You can have more than one call on the bridged line. To place a new call where there is an active
The SIP-T46S IP phone can handle a maximum of 50 calls at one time.
-
Press the line key. The original call is placed on hold.
- Press the line key. The active call is placed on hold.
call on phone A, do one of the following on the phone A:
Enter the desired number using the keypad.
The SIP-T46S IP phone can handle multiple calls at a time. However, only one active call (the call
To place multiple calls:
Enter the desired number using the keypad.
Enter the desired number using the keypad.
, or the Send soft key.
Press ,
that has audio associated with it) can be in progress at any time, other calls are placed on hold.
- Press or the Hold soft key. The original call is placed on hold.
You can have more than one call on your SIP-T46S IP phone. To place a new call during an active Press , , or the Send soft key.
Press , , or the Send soft key.
The SIP-T46S IP phone can handle a maximum of 50 calls at one time.
, or the Send soft
Press the New Call soft key to enter the dialing screen. - Press or the Hold soft key to place the original call on hold.
call, do one of the following:
Phone A will dial the entered number.
211
- Press or the Hold soft key to place the original call on hold.
To place multiple calls:
Enter the desired number using the keypad. Press the New Call soft key.
- Press the line key. The active call is placed on hold.
Press the New Call soft key.
Press , Enter the desired number using the keypad. , or the Send soft key.
You can have more than one call on your SIP-T46S IP phone. To place a new call during an active
Enter the desired number using the keypad.
Enter the desired number using the keypad.
Phone A will dial the entered number. Press , , or the Send soft key.
call, do one of the following:
Press , , or the Send soft key.
Press , , or the Send soft key.
- Press the line key. The active call is placed on hold. - Press the line key. The original call is placed on hold. You can press or
- Press or the Hold soft key to place the original call on hold.
retrieve the desired call.
You can press or to switch between calls, and then press the Resume soft key to
Enter the desired number using the keypad. Enter the desired number using the keypad.
scenario. In a BLA scenario, the status of the line key LED which associates with a bridged line
will change. For more information on line key LED indicators, refer to
3. - With the handset on-hook, enter the desired number using the keypad.
Press ,
You can do the following using the IP phone in a BLA scenario:
Advanced Phone Features
To place a call using the headset:
Placing calls

Do one of the following:
Answering calls

Place a call on hold
- With the optional headset connected, press

Press the line key to obtain a dial tone.
Retrieving a held call

Enter the desired number using the keypad.
Icon Instructions on page
Placing Calls
Press , , or the Send soft key.
Advanced Phone Features
You can have one call or multiple calls on the bridged line.
- With the optional headset connected, press
To place a call on the bridged line:
Enter the desired number using the keypad.
Press , , or the Send soft key.
Do one of following:
- Enter the desired number using the keypad when the phone is idle. Press
Note
Basic Call Features
To permanently use the headset mode, refer to
the Send soft key.
Basic Call Features
Icon Instructions on page
To place multiple calls:
The phone will dial the entered number.
The SIP-T46S IP phone can handle multiple calls at a time. However, only one active call (
You can have more than one call on your SIP-T46S IP phone.
, or the Send soft key.
- Press the line key when the phone is idle to enter the dialing screen.
that has audio associated with it) can be in progress at any time, other calls are placed on
To place a new call during an active call, do one of the following:
The SIP-T46S IP phone can handle a maximum of 50 calls at one time.
Enter the desired number using the keypad and then press
key.
Basic Call Features
1. Press the line key. The active call is placed on hold.
To place multiple calls:
The phone will dial the entered number.
- Enter the desired number using the keypad. You can have more than one call on your SIP-T46S IP phone. To place a new call during an
to activate the headset mode.
To place multiple calls on the bridged line:
call, do one of the following:
to activate the headset mode.
soft key.
- Press Basic Call Features or the
, , or
You can have more than one call on the bridged line. To place a new call where there is an act
- Press the line key. The active call is placed on hold.
call on phone A, do one of the following on the phone A:
Enter the desired number using the keypad.
2. Press or the Hold
- Press or the Hold soft key. The original call is placed on hold.
Press , , or the Send soft key.
to activate the headset mode.
on hold.
to activate the headset mode. Press the New Call soft key to enter the dialing screen.
to activate the headset mode. - Press or the Hold soft key to place the original call on hold.
, or the Send soft
,
- Press the Enter the desired number using the keypad. New Call soft key. Enter the desired number
Press the New Call soft key.
using the keypad.
Press , , or the Send soft key.
Enter the desired number using the keypad.
to activate the headset mode.
Phone A will dial the entered number.
- Press or the
, , or
Headset Prior on page 83.
Press , , or the Send soft key.
on page 83.
to activate the headset mode. - Press the line key. The original call is placed on hold.
You can press
You can press or
press the Resume soft key to retrieve the desired call.
Enter the desired number using the keypad.
retrieve the desired call.
, or the Send soft key.
Press ,
to activate the headset mode.
Note If multiple accounts are registered on the phone, you can first press the desired line key on t
Phone A will dial the entered number.
, , or the Send soft
idle screen or press the Line soft key on the dialing screen, and then you can use the selecte
anSwerIng callS
Headset Prior on page 83.
account to place a call.
When you are not in another call, you can answer a call in
one of three ways:
on page 83. - Using the handset
- Using the speakerphone
- Using the headset
answering when not in another call:
Call duration and destination will always appear on the
LCD screen for the active call.
211
to switch between calls, and then press the Resume soft key to
Basic Call F
Icon Instructions
or the Send soft key.
,
to activate the headset mode.
to activate the headset mode.
,
Headset Prior on page 83.
, , or the Send sof
Send soft key.
soft key to place the original call
Send soft key.
to switch between calls, and then
to switch between calls, and then press the Resume soft key
on pag
, o
2