Teletext Services; Software Upgrade; Am Search And Upgrade Mode - Bush DLED49FHD Instruction Manual

Advanced features
Getting the most from your TV
event and press the OK button. Then select Delete Timer
on Event option. The timer will be cancelled.
Notes: You cannot switch to any other channel while
there is an active timer on the current channel.
It is not possible to set timer for two or more individual
events at the same time interval.

Teletext Services

Press the Text button to enter. Press again to activate
mix mode, which allows you to see the teletext page
and the TV broadcast at the same time. Press once more
to exit. If available, sections in the teletext pages will
become colour-coded and can be selected by pressing
the coloured buttons. Follow the instructions displayed
on the screen.
Digital Teletext
Press the Text button to view digital teletext information.
Operate it with the coloured buttons, cursor buttons
and the OK button. The operation method may differ
depending on the contents of the digital teletext. Follow
the instructions displayed on the digital teletext screen.
When the Text button is pressed again, the TV returns to
television broadcast.
MHEG Teletext
With digital terrestrial broadcasting (DVB-T), in addition
to pictures and sound, you can also view digital teletext.
Digital teletext is sometimes broadcast at the same time
with the normal broadcasting.
Press the Text or Red button
The digital teletext information appears
Operate it with the coloured buttons, directional buttons
and OK button
The operation method may differ depending on the
contents of the digital teletext. Follow the instructions
displayed on digital teletext screen. Press the Text button
to returs to television broadcast.

Software Upgrade

Your TV is capable of finding and updating the firmware
automatically via the broadcast signal or via Internet.
Software upgrade search via user interface
On the main menu select Settings>System and then
More. Navigate to Software upgrade and press the OK
button. Then select Scan for upgrade and press OK
button to check for a new software upgrade.
If a new upgrade is found, it starts to download the
upgrade. After the download is completed, a warning
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
22 Advanced features
will be displayed, press OK button to complete software
upgrade process and restart TV.

3 AM search and upgrade mode

Your TV will search for new upgrades at 3:00 o'clock if
Automatic scanning option is set to Enabled and if the
TV is connected to an aerial signal or to Internet. If a new
software is found and downloaded successfully, it will be
installed at the next power on.
Note: Do not unplug the power cord while led is blinking
during the reboot process. If the TV fails to come on after
the upgrade, unplug, wait for two minutes then plug it
back in.
All updates are automatically controlled. If a manual
search is carried out and no software is found then this
is the current version.