Preparing; Moving And Lifting The Monitor - LG 32MN58H Owner's Manual

Preparing

NOTE
• Image shown may differ from your monitor.
• The items supplied with your product may vary depending on the
model.
• Without prior notice, all product information and specifications
contained in this manual are subject to change to improve the
performance of the product.
• Your monitor's OSD (On Screen Display) may differ slightly from
that shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this monitor in the future.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your monitor's USB port.
B
A
*A 10 mm
*B 18 mm
• Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
• Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
• Always use genuine components to ensure safety and product
performance.
• The product warranty will not cover damage or injury caused by
the use of unauthorized components.
6

Moving and lifting the monitor

When moving or lifting the monitor, follow these instructions to
prevent the monitor from being scratched or damaged and to ensure
safe transportation, regardless of its shape or size.
• It is advisable to place the monitor in the original box or packing
• Before moving or lifting the monitor, disconnect the power cord
• Hold the top and bottom of the monitor frame firmly. Do not hold
B
• When holding the monitor, the screen should face away from you
• When transporting the monitor, do not expose the monitor to jolts
A
• When moving the monitor, keep it upright and never turn the
• Image shown may differ from your monitor.
• Avoid touching the monitor screen as much as possible. Do not
• Do not carry the monitor upside-down by holding the stand body
• When handling the monitor, be careful not to damage the
material before attempting to move it.
and all cables.
the panel itself.
to prevent it from being scratched.
or excessive vibration.
monitor on its side or tilt it sideways.
CAUTION
apply pressure.
- This may result in damage to the screen or some of the pixels
used to create images.
(or stand base) as this may cause it to fall off, resulting in damage
or injury.
protruding joystick button.