Time Settings - LG 32MN58H Owner's Manual

Basic image options
• Backlight : Adjusts the brightness of the screen by controlling
the LCD backlight. If you decrease the brightness level, the screen
becomes darker and the power consumption will be reduced
without any video signal loss.
• Contrast : Increases or decreases the gradient of the video signal.
You may use Contrast when the bright part of the picture is
saturated.
• Brightness : Adjusts the base level of the signal in the picture.
• Sharpness : Adjusts the level of crispness in the edges between
the light and dark areas of the picture. The lower the level, the
softer the image.
• Colour : Adjusts intensity of all colours.
• Tint : Adjusts the balance between red and green levels.
• Colour Temperature : Choose one of three automatic colour
adjustments. Set to warm to enhance hotter colours such as red,
or set to cool to see less intense colours with more blue. You can
control red, green, blue to adjust colour details.
• Advanced Control : Customizes the advanced options.
• Reset : Restores the options of each mode to the factory default.
Advanced image options
(Depending on model)
• Dynamic Contrast : Adjusts the contrast to keep it at the best
level according to the brightness of the screen. The picture is
improved by making bright parts brighter and dark parts darker.
• Dynamic Colour : Adjusts screen colours so that they look livelier,
richer and clearer. This feature enhances hue, saturation and
luminance so that red, blue and green white look more vivid.
• Noise Reduction : Reduces screen noise without compromising
video quality.
• Gamma : You can adjust brightness of dark area and middle gray
level area of the picture.
- Low : Make the dark and middle gray level areas brighter.
- Medium : Express the original picture level.
- High : Make the dark and middle gray level area darker.
• Black Level : Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.
• Motion Eye Care : Adjusts screen brightness to prevent eye glare.
• Film Mode : Makes video clips recorded in film look more natural.
This feature operates only in 480i / 576i / 1080i / 1080p (24 Hz)
resolution.
• Colour Gamut : Advanced Control Maximizes the utilization of
colour to increase colour quality.
- Standard: Displays standard set of colours.
- Wide: Increase number of colours used.
• Edge Enhancer : Shows clearer and distinctive yet natural edges
of the video.
16
AUDIO Settings (Depending on model)
SETTINGS ➾ AUDIO ➾ Auto Volume
Activates the Auto Volume feature to keep the volume level
consistent.
SETTINGS ➾ AUDIO ➾ Balance
Adjust balance between the left and right speakers according to your
room environment.
SETTINGS ➾ AUDIO ➾ Sound Mode
Selects one of the preset sound modes or customizes options in each
mode.
• Standard : Select when you want standard-quality sound.
• Music : Select when you listen to music.
• Cinema : Select when you watch movies.
• Sport / Cricket : [Depending on model] Select when you watch
sports events.
• Game : Select when you play games.
- Treble : Controls the dominant sounds in the output. When
you turn up the treble, it will increase the output to the higher
frequency range.
- Bass : Controls the softer sounds in the output. When you turn
up the bass, it will increase the output to the lower frequency
range.
- Reset : Resets the sound mode to the default setting.

TIME Settings

SETTINGS ➾ TIME ➾ Clock
Sets the time.
SETTINGS ➾ TIME ➾ Off Time/On Time
Sets the time to turn on or off the monitor automatically. To use this
function, you should set the current time and date in advance.
NOTE
• If you do not press any button within 2 hours after the monitor
turns on by the On Time feature, the monitor enters the standby
mode automatically.
• If you set both Off time and On time features to the same time,
the Off time feature overrides the On time feature.
SETTINGS ➾ TIME ➾ Sleep Timer
Sets the length of time until the monitor to turns off. When you turn
the monitor off and turn it on again, the Sleep timer feature will be
set to off.
SETTINGS ➾ TIME ➾ Auto Off(On Time)
If On Time is enabled, the monitor will be turned on at the specified
time. If you do not operate the monitor for two hours, the monitor
will be turned off automatically.
SETTINGS ➾ TIME ➾ Automatic Standby (Depending on model)
If you do not press any button on the monitor or remote control for
a certain period, the monitor will automatically switch to standby
mode.