WK8256NSS
CARE AND CLEANING
•
Disconnect the kettle from mains power and ensure it has
cooled before cleaning it.
Main body
•
Wipe the main body clean with a slightly damp cloth.
•
Dry thoroughly before use.
Never clean the kettle with scourers, abrasive pads or
chemicals.
De-scaling
In hard water areas, lime-scale deposits may appear on the
inside surface of the kettle. These can be removed by regular
use of de-scaling products.
•
Follow the maker's instructions to make and use the de-
scaler.
•
Clean the body of the kettle after de-scaling to remove any
trace of de-scaler.
Cleaning the filter
A removable mesh filter is located inside the spout to trap loose
limescale particles. This should be cleaned regularly if limescale
collects on the filter surface.
•
Locate the filter catch inside
the spout (arrowed).
•
Press the catch gently and the filter will unclip. Lift the filter
out from inside the kettle.
•
Rinse the filter in warm water and brush it if necessary with
a small toothbrush to remove any limescale deposits.
•
To re-fit the filter, locate the bottom of the filter into the
opening inside the spout.
•
Press the top to click the catch into place.
PAGE 7