Operation - Adesso WK8256NSS Instruction Manual

OPERATION

First use:
Before using your kettle to make any drinks you should ensure
that it is thoroughly cleaned.
• Following the instructions in the next sections, fill the kettle
to the maximum level with fresh water and boil the water.
• Discard the water and repeat the process two more times.
Your kettle is now ready to use.
Filling the kettle:
• Pour away any water in the kettle.
• Press the lid release.
The lid will open.
• Fill the kettle through the top opening with fresh, cold water
to the level you need on the water scale.
For safe operation, ensure that water is always visible between
the maximum (1.7L) and minimum (0.75L) marks on the water
scale.
Never fill the kettle through the spout as you may wash lime-
scale back from the filter into the kettle.
• Press the kettle lid back into place.
• Place the kettle on the power base.
PAGE 6
Boiling the water:
CAUTION: Never leave the appliance unattended when it is
operational or containing hot water.
• Connect the power cable to a convenient outlet.
• Press the power switch down.
The power switch will light and the kettle will heat the water.
When the water boils the kettle will switch off automatically.
• Lift the kettle off the base and pour the water out slowly to
make your drinks.
Switching the kettle off while operational:
• Lift the power switch up.
The kettle will switch off.
If the kettle overheats:
The kettle will overheat if it boils dry due to low water level.
The safety cutout will operate. Unplug the kettle and leave it to
cool for 15 minutes. After this time, normal operation should be
restored.
WK8256NSS