Technical Safety - LG LLF1131BBSL Owner's Manual

Technical safety

• Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear
of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage compartments of the appliance,
unless they are of the type recommended by the manufacturer.
• The refrigerant and insulation blowing gas used in the appliance require special
disposal procedures. Consult with service agent or a similarly qualified person before
disposing of them.
• This appliance contains a small amount of isobutane refrigerant (R600a), natural gas
with high environmental compatibility, but it is also combustible. When transporting and
installing the appliance, care should be taken to ensure that no parts of the refrigerating
circuit are damaged.
• Refrigerant squirting out of the pipes could ignite or cause an eye injury.
• If a leak is detected, avoid any naked flames or potential sources of ignition and air
the room in which the appliance is standing for several minutes. In order to avoid the
creation of a flammable gas air mixture if a leak in the refrigerating circuit occurs, the
size of the room in which the appliance is used should correspond to the amount of
refrigerant used. The room must be 1 m
inside the appliance.
• The amount of refrigerant in your particular appliance is shown on the identification
plate inside the appliance.
• Never start up an appliance showing any signs of damage. If in doubt, consult your
dealer.
4
2
in size for every 8 g of R600a refrigerant