Download Print this page

Mortuary Lift The Ultimate 1000 Lift Quick Start Manual

Load scale calibration procedure

Hide thumbs Also See for The Ultimate 1000 Lift:

Load Scale

Calibration

Procedure

Table of Contents

Need help?

Do you have a question about the The Ultimate 1000 Lift and is the answer not in the manual?

Page 1 Load Scale Calibration Procedure...
Page 2 Instructions on Calibrating your Load Scale NOTE: Your load scale was calibrated prior to shipping to your location. Only use this procedure if your scale displays wastly in- accurate loads. Please, first try zeroing your machine out after in- stallation, prior to bearing a load, with Glidetec Straps attached. BEFORE YOU BEGIN: Please read through the procedure.
Page 3 3. Your screen should display CAL 1 for a second and then 1000. If it does not display 1000 please use the arrow keys to set it to 1000. Press ENTER. 4. Your screen should display CAL 2 for a second and then 1. If it does not display 1 please use the arrow keys to set it to 1.
Page 4 10. Unload the weight from the machine. 11. With Glidetec straps attached press ZERO on the display. 12. Check your calibration by reloading the machine with the weight you used to calibrate with and determine correct calibration. 13. If all is well. Reinstall CAL tab on back of display head. 14.