Main Measurement Screen - Lafayette 01163 User Manual

Model 01163

Main Measurement Screen:

The Main Measurement Screen shows all of the current measurement information. This screen is
shown whenever a measurement is in progress. This screen is also the default start-up display.
6 Peak Force: The peak measurement force is displayed in large numbers on the upper left of
the Main Measurement Screen. This value is the peak pounds or kilograms applied during a
test. Force values are displayed to tenths of a pound (or kilogram).
7
Peak Time: The peak time value is displayed in seconds on the bottom left of the screen
under the peak force. This number is the time during the test when the peak force occurred.
Time values are displayed to hundredths of a second.
8
Instantaneous Force: The instantaneous force
value is displayed on the upper right on the
Main Measurement Screen. This value is the
force applied to the MMT at any time.
Running Time: The running time value is
9
displayed on the lower right of the Main
Measurement Screen. This value shows the total
time that force has been applied. After a test has
ended, this value shows the total length of the
test in seconds.
10 Range Indicator (H or L): The range indicator
shows if the MMT is set in the high or low
measurement setting. If in kg's, the high range
will be 0kg - 136.1kg and the low range will be
0kg - 22.6kg. If in lbs., the high range will be
0lbs. - 300lbs. And the low range will be 0lbs. - 50lbs. The range indicator is the upper most
indicator in the center of the Main Measurement Screen. The Range is changed by pressing
the RANGE button.
11 Scale Indicator (LB or KG): The scale indicator shows if the MMT is set to measure in
pounds or kilograms. The scale indicator is the second indicator in the center of the Main
Measurement Screen. The scale is changed by pressing the LB/KG button.
Low Battery Indicator: The low battery indicator is present when a low battery condition
12
exists. The low battery indicator is the third indicator in the center of the Main Measurement
Screen.
13 Time Units Label: The time units label is the "S" on the bottom center of the Main
Measurement Screen. This label indicates that the time measurements are in seconds.
This label does not change.
Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail:eval@lafayetteinstrument.com Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail:eval@lafayetteinstrument.com
User Instructions
6
10
7
11 12
7
8
9