Beep; Time - Lafayette 01163 User Manual

Model 01163

Beep:

The Beep function activates an
audible tone that indicates when a
preset test length has expired. With
the beep enabled, a single beep is
sounded at the start of the test. The
MMT automatically detects when
force is applied, so no buttons have
to be pressed to begin the test. After
the preset test time is reached, 4
successive beeps are sounded to
indicate that the test is over.
To activate the Beep function:
1. Enter the Main Menu by pressing the MENU button.
2. Press the SCROLL button two (2) times to move the cursor to BEEP.
3. Press ENTER to turn on BEEP
4. Press the SCROLL button four (4) times to move the cursor to END.
5. Press ENTER to exit the menu.
After the test time has ended, no more data is measured until RESET is pressed. A reset will
automatically occur when a new force is applied. Only values that are measured during the test
time are used to determine the peak value.

Time:

This setting determines the preset
test time length for the test. The
preset test time can be set from 1
second to 10 seconds in 1 second
increments. This only works when
the Beep function is activated.
To set the test time:
1. Enter the Main Menu by pressing the MENU button.
2. Press the SCROLL button three (3) times to move the cursor to TIME.
3. Press ENTER to increment the time. The time loops back to 1 after 10 is reached.
4. Press the SCROLL button three (3) times to move the cursor to END.
5. Press ENTER to exit the menu.
Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail:eval@lafayetteinstrument.com Fax: 765-423-4111 . www.lafayetteinstrument.com . E-mail:eval@lafayetteinstrument.com
User Instructions
11