Peiying PY0107 Owner's Manual page 7

MOuNtiNg
1. Execute all connections before connecting the device to power supply. Power
off the car engine first.
2. Connect the power (+12 V) to power supply input (5,5/2,5 socket).
3. Connect V1 (yellow cinch) to the front view camera.
4. Connect V2 (white cinch) to the rearview camera.
5. The monitor should be located in a place that does not obstruct driver's view,
nor where it could disturb operation of the safety systems of the vehicle. Make
sure to mount the monitor firmly (use the double-sided adhesive tape).
6. Turn on the vehicle's engine. The view from the camera will be displayed on
the monitor. Please note, the V2 channel has the priority. When connected
as instructed above, the monitor will display view from the front view camera;
switch on reverse gear to display the rearview camera image.
User's manual
③
⑤
④
①
②
EN
7