Before First Use; Charging - Philips 9170XL/43 User Manual

ENGLISH
16

Before First Use

◗ Charge the razor before you start using it
(see 'Charging'). Make sure the razor is
switched off before you start charging it.
◗ Remove any sticker or protective foil from
the LCD Display before using razor.
Important
◗ Only use the power plug and/or charging
stand provided to charge the razor.
◗ The charging plug converts 100 – 240V AC to
less than 24V DC.

Charging

◗ Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
◗ Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
◗ Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
◗ You may also shave using the cord provided.
This razor will not recharge while being used
corded.
◗ Do not charge razor in a pouch.
◗ Recharge only when the plug symbol starts
blinking.This symbol may appear when your
razor is ON or OFF.
◗ Do not charge/recharge or use razor corded
until fully dried.
Placing or removing razor from
charging stand:
C
◗ Always place razor in stand in an upright
position making sure charging contacts in
bottom of stand fit into recess in bottom of
razor.
C
◗ Always remove razor from stand by lifting
straight up. Do not tilt razor.
◗ Do not leave the charging stand with the
razor in it continuously plugged into outlet as
it would reduce life of batteries. If storing
razor in stand, remove the plug from outlet as
soon as the razor is fully charged.
C
Connect cord directly to razor or place
1
razor in charging stand and connect the
small plug of cord to charging stand.
Connect the charging plug into any 100V
to 240V AC outlet. Use only the charging
plug provided.
◗ An adaptor plug may be necessary for
charging plug usage in some foreign countries.
Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to
work on 100V to 240V AC systems.
ENGLISH
17