The Eastwood Lighting System Light Module utilizes the latest LED technology to achieve the brightest 1000 Lumen light output and most energy efficiency possible. The progressive dimming fea- ture allows infinitely adjustable light output to provide only the light needed while conserving battery power.
• Keep metal housing of work light away from live electrical sources. • Never operate or store light in damp or wet conditions. • Keep work light away from excessive heat sources to avoid damage. To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 4
- The array of 4 Green, Amber and Red LED’s at the rear of the Housing will all illuminate to indicate full charge (FIG 2). - Close Charging Port Cover to maintain IP-65 rating. Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
#32403 Additional Eastwood Light Module Mount MOUNTING THE LIGHT MODULE ON OPTIONAL ACCESSORIES (Not Included) MOUNTING TO THE # 32401 EASTWOOD UNDERHOOD LIGHT BRACKET. • Flip Latches of the sliding Light Module FIG. 3 Mount upward (FIG 3). • Slide Magnetic Base of Lamp into sliding Light Module Mount.
Page 6
(FIG 7). • Using two included Thumb Screws, secure the two halves together (FIG 8). • Adjust as required. FIG. 8 Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com...
Page 7
Light Module Support Bar and thread it into the Magnetic Base of the Light Module (FIG 9). • Adjust as required. • Utilize the remaining two Thumbscrews to attach additional #32400 Eastwood Light Modules. To order parts and supplies: 800.343.9353 >> eastwood.com...
Page 8
If you have any questions about the use of this product, please contact The Eastwood Technical Assistance Service Department: 800.343.9353 >> email: techelp@eastwood.com PDF version of this manual is available at eastwood.com The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA 800.343.9353 eastwood.com...