Advertisement
#32402 EASTWOOD LIGHTING SYSTEM TRIPOD
Consists of:
(1) Tripod
(1) Long Module
Support Bar
(1) Short Module
Support Bar
(5) Thumb Screws
ASSEMBLING THE #32402
EASTWOOD TRIPOD:
• Insert one of the Thumb Screws into
the sliding collar attached to the 3-leg
assembly and thread it securely into the
Main Post and tighten in place (FIG 9).
• Using a Thumb Screw, trap the Short
Module Support Bar between the Long
Module Support Bar and top of the
Main Post then thread the Thumbscrew
securely into the Main Post (FIG 9).
• Pass a Thumb Screw through the open
hole in the Light Module Support Bar and
thread it into the Magnetic Base of the
Light Module (FIG 9).
• Adjust as required.
• Utilize the remaining two Thumbscrews
to attach additional #32400 Eastwood
Light Modules.
To order parts and supplies: 800.343.9353 >> eastwood.com
Thumbscrews
Short Support Bar
FIG. 9
Long
Module
Support
Bar
7
Advertisement
