Philips HS8015/18 User Manual page 15

Question
I dropped the
shaver and
the shaving
unit fell apart.
How should I
reassemble the
shaving unit?
Why does the
shaver suddenly
produce a
strange noise?
Answer
Place the cutters in the shaving head holders with
the cutter legs pointing upwards. Place the guards
onto the holders (over the cutters) and turn them
anticlockwise until they lock into position. One of the
guards does not have a shaving conditioner hole in
the centre and needs to be attached onto a specific
holder. This is the holder that is closest to the on/off
button when the shaving unit is assembled on the
shaver. If the cutters and the guards have become
mixed up, it may take several weeks before optimal
shaving performance is restored.
You probably did not reassemble the shaving unit
properly. Place the cutters in the shaving head
holders with the cutter legs pointing upwards. Place
the guards onto the holders (over the cutters)
and turn them anticlockwise until they lock into
position. One of the guards does not have a shaving
conditioner hole in the centre and needs to be
attached onto a specific holder. This is the holder
that is closest to the on/off button when the shaving
unit is assembled on the shaver. If the cutters and
the guards have become mixed up, it may take
several weeks before optimal shaving performance
is restored.
Extra-thorough cleaning method
Make sure the appliance is switched off.
1 Pull the shaving unit off the shaver.
EngliSH
17