Wall Mount Instructions - Veridian Healthcare Sterling Series Instruction Manual

WALL MOUNT INSTRUCTIONS

KEEp IN MINd ThE dESIREd LOCATION OF pATIENT CARE whEN SELECTINg ThE
LOCATION TO MOUNT ThE CLOCK ANEROId FIxTURE.
1. Using the Wall Mount Bracket as template, use a pencil
to mark the screw hole location directly onto the wall.
2. Drill four pilot holes into the wall using a drill bit smaller
than the width of the drywall anchor over each pencil
mark.
3. Insert the drywall anchors into the four holes until they
are ush with the wall; it may be necessary to use a
hammer or mallet to lightly tap the anchors into place.
4. Secure the Wall Mount Bracket to the drywall anchors
using the four 1" Phillips-Head screws; do not over
tighten, Fig 1.
5. Slide the Wall Clock onto the Wall Mount Bracket, Fig 2.
6. Secure the Wall Clock onto the bracket using the two
1/4" Phillips-Head Lock Screws, Fig 3.
110º gauge Face Rotation
4 4 • • E E N N G G L L I I S S H H
Fig. 1
Fig. 2
Fig. 3