Launching The Epson Link2 Software - Epson P-4500 Quick Reference Manual

3. Open the USB connector's rubber cover and
connect the USB cable to this device. Then
connect the other end of the USB cable to the
computer.
The LCD turns off.
4. Launch the Epson Link2 software (For details,
see "Launching the EPSON Link2 Software").
Only data that has not yet been backed up will be
copied to the computer with the auto backup
function.
For Windows:
To disconnect the device from a computer, click
Unplug or Eject Hardware on the computer
screen, turn off the device, then remove the USB
cable.
For Macintosh:
To disconnect the device from a computer, drag
and drop the device icon to the trash can on the
computer screen, turn off the device, then
remove the USB cable.

Launching the Epson Link2 software

For Windows
Click Start, point to All Programs (or Programs),
then select EPSON Camera. Select Epson Link2, then
click Epson Link2.
For Macintosh
Double-click the Epson Link2 icon in the Epson Link2
program folder.
Backing Up Memory Cards
2
2
2
2
2
2
2
2
2
11