Table of Contents
Advertisement
A
C
POS H
CTIVE
LUB
ARDWARE
To set up the Apple AirPort Express router:
1. Place the router in a convenient location near the receipt printer.
2. Connect an Internet-connected Ethernet cable to the Ethernet WAN port (fig. 4). Use the
Ethernet cable included in your package if one is not available. (The Ethernet WAN Port is
next to the Power connector. Do not use the Ethernet LAN port.)
3. Connect the USB cable from the receipt printer to the USB port.
4. Connect the supplied power cable to the Power connector.
5. Plug the other end of the power cable in to the AC power outlet.
A
C
S
, I
CTIVE
LUB
OLUTIONS
NC
S
ETUP
Figure 4: Apple AirPort Express router—rear panel
.
3
30 N
2019
OVEMBER
Advertisement
Table of Contents
