Page 1
Active Club POS Hardware Setup The Active Club POS hardware package includes the following (see figure 1): Heckler stand for iPad APG Vasario 1616 cash drawer Connecting cable for cash drawer Star Micronics TSP143IIU Eco USB receipt printer Printer power cable...
Page 2
POS H CTIVE ARDWARE ETUP To set up the cash drawer: 1. Open the cash drawer and inspect it to ensure that all packing material has been removed. 2. Turn the drawer over and plug in the larger end of the cash drawer cable (fig.
Page 3
POS H CTIVE ARDWARE ETUP To set up the Apple AirPort Express router: 1. Place the router in a convenient location near the receipt printer. 2. Connect an Internet-connected Ethernet cable to the Ethernet WAN port (fig. 4). Use the Ethernet cable included in your package if one is not available.
Page 4
POS H CTIVE ARDWARE ETUP Configuring the AirPort Express router First, confirm that your iPad is connected to the AirPort Express router by checking your Wi-Fi Settings. 1. Open iPad Settings and choose Wi-Fi. 2. Locate the AirPort Express in the list of available network connections; tap to join the network.
Page 5
POS H CTIVE ARDWARE ETUP Figure 6: AirPort utility 5. Tap the connection (e.g., “AirPort Station 1”) to open the connection settings (fig. 7). 6. To change the settings, tap Edit. 7. If prompted, enter your password to proceed. Figure 7: Connection settings 8.
POS H CTIVE ARDWARE ETUP Base station settings If you have more than one AirPort router, we recom- mend renaming this one to avoid confusion. For exam- ple, you might assign the router names Airport Station 1 and Airport Station 2. To change a router name or access password, choose Name or Password from the menu (fig.
POS H CTIVE ARDWARE ETUP Internet Connection settings Apple recommends that routers be given static IP addresses. To copy the router-assigned (DHCP) addresses to static ones: 1. On the DHCP tab, note the IP address, Subnet Mask, Router Address, and the DNS Server settings (fig.
Active Club POS. To configure printer settings: 1. On the iPad, open Settings. 2. From the Settings menu, choose Active Club POS > Printer Settings (fig. 15). 3. Enter the following: IP Address: The address of your Apple router (e.g., TCP: 192.168.23.99)
Page 9
To reenable it, move the switch to the On position. Another reason may be that the card reader has become dirty. Active Club Solutions recommends card reader cleaners that you purchase when ordering your POS hardware.
Page 10
POS H CTIVE ARDWARE ETUP Pairing Walker Bluetooth readers The Walker credit-card reader comes in two versions: the version obtained from EVO Payments works from the iPad headphone jack, as described above. The reader supplied by OpenEdge is a Bluetooth model, which must be paired with your iPad.
Page 11
POS H CTIVE ARDWARE ETUP Enabling the barcode scanner The Socket Mobile 7Ci barcode scanner is a Bluetooth device which must be paired with your iPad. Important: Please review the full instructions below before you begin the setup procedure. Pairing the barcode scanner with your iPad 1.
POS H CTIVE ARDWARE ETUP Factory reset procedure 1. Press and hold the small power button until the LED turns blue and the scanner beeps twice. (It will beep low and then high.) 2. Hold the large scan button and then press the small power button until you hear three beeps.