Active Club POS Hardware Setup page 11

A C POS H
CTIVE LUB ARDWARE
Enabling the barcode scanner
The Socket Mobile 7Ci barcode scanner is a Bluetooth device which must be
iPad.
Important: Please review the full instructions below before you begin the setup procedure.
Pairing the barcode scanner with your iPad
1. Press and hold the small power button until the LED
turns blue and the scanner beeps twice. (It will beep
low and then high.)
2. The scanner must be set to iOS mode. This will
ensure that scanning a barcode will add the product
to the sale and that your virtual keyboard will be
available on your iPad.
3. It's important that your barcode scanner NOT be
paired with any iPad during the iOS configuration
process. If the scanner has previously been paired with an iPad or other device, first follow
the factory reset procedure on page 12.
4. Print this page and scan the barcode below to enable iOS mode. The scanner will beep three
times to confirm.
5. On your iPad, tap the Settings icon to open Settings. Tap the Bluetooth menu to open the
Bluetooth settings.
6. Turn Bluetooth on. Your iPad will search for available devices to connect with.
locates the Socket CHS scanner, tap it to connect
A C S , I
CTIVE LUB OLUTIONS NC
S
ETUP
.
.
11
paired with your
© Socket Mobile, Inc.
Once the iPad
30 N 2019
OVEMBER