Table of Contents
Advertisement
It allows you to receive system notifications, such as updates. It also has a really
useful Quick Actions on the bottom.
Checking notifications
1.
Tap the
icon in the lower-right corner of the screen to launch the ACTION
CENTER screen.
2.
All messages appears in the Action Center and you can select and tap them
to read.
21
Action Center
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 100002435 and is the answer not in the manual?
Questions and answers
My notebook does not turn on
Your Onn notebook (part number 100002435) may not be turning on due to one of the following reasons:
1. Battery Issues: If the battery was fully drained, it might take a few minutes before the device can be powered on. Charging from 0% to 70% takes approximately 1.5 hours.
2. Over-Discharge Protection Mode: If the device has not been used for a long time, the battery might be in over-discharge protection mode, requiring a longer charging time before it can turn on.
3. UEFI Settings Change: If you recently changed the "Operating System" setting in the UEFI setup, the device may no longer boot properly, leading to a black screen.
4. Firmware or NVRAM Issue: If attempts were made to reset the NVRAM, but the device still only shows a black screen, the firmware might be corrupted.
To troubleshoot, try charging the device for at least 1.5 hours, resetting the UEFI settings (if possible), or seeking support for repair or replacement.
This answer is automatically generated
Our laptop 1766620 Onn-100002435 will NOT come on?
The Onn laptop model 100002435 may not turn on due to the following reasons:
1. Battery Over Discharge Protection Mode – If the laptop has not been used for a long time, the battery may be in over-discharge protection mode, requiring more time to charge before it can power on.
2. Fully Drained Battery – If the battery was completely drained, it may take a few minutes of charging before the laptop can be turned on.
3. Incorrect OS Selection in Firmware – Changing the OS selection setting in the Aptio Setup Utility to an unsupported option (e.g., Linux) may cause the device to become unresponsive.
To troubleshoot, ensure the laptop is charging properly, wait for sufficient charging time, and check the firmware settings if needed.
This answer is automatically generated
will not charge, flashing only never green. can battery be replace