Do you have a question about the 100002435 and is the answer not in the manual?
Questions and answers
Delane Pierzina
February 9, 2025
My notebook does not turn on
1 comments:
Mr. Anderson
February 11, 2025
Your Onn notebook (part number 100002435) may not be turning on due to one of the following reasons:
1. Battery Issues: If the battery was fully drained, it might take a few minutes before the device can be powered on. Charging from 0% to 70% takes approximately 1.5 hours.
2. Over-Discharge Protection Mode: If the device has not been used for a long time, the battery might be in over-discharge protection mode, requiring a longer charging time before it can turn on.
3. UEFI Settings Change: If you recently changed the "Operating System" setting in the UEFI setup, the device may no longer boot properly, leading to a black screen.
4. Firmware or NVRAM Issue: If attempts were made to reset the NVRAM, but the device still only shows a black screen, the firmware might be corrupted.
To troubleshoot, try charging the device for at least 1.5 hours, resetting the UEFI settings (if possible), or seeking support for repair or replacement.
This answer is automatically generated
Delane Pierzina
February 22, 2025
Our laptop 1766620 Onn-100002435 will NOT come on?
1 comments:
Mr. Anderson
February 22, 2025
The Onn laptop model 100002435 may not turn on due to the following reasons:
1. Battery Over Discharge Protection Mode – If the laptop has not been used for a long time, the battery may be in over-discharge protection mode, requiring more time to charge before it can power on.
2. Fully Drained Battery – If the battery was completely drained, it may take a few minutes of charging before the laptop can be turned on.
3. Incorrect OS Selection in Firmware – Changing the OS selection setting in the Aptio Setup Utility to an unsupported option (e.g., Linux) may cause the device to become unresponsive.
To troubleshoot, ensure the laptop is charging properly, wait for sufficient charging time, and check the firmware settings if needed.
This answer is automatically generated
jerry ostermiller
March 7, 2025
will not charge, flashing only never green. can battery be replace
100002435 100005693 Equipment tested for compliance A2HWT9L10 A2HWT9L11 as a complete unit FCC information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 3
FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.5 cm between the radiator and your body.
IMPORTANT SAFETY INSTRUCTIONS Some of the following information may not apply to your particular product; however, as with any electronic product, precautions should be observed during handling and use. • Read these instructions. • Keep these instructions. • Heed all warnings. •...
Page 5
ADDITIONAL SAFETY INFORMATION • The AC adaptor and apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Always leave sufficient space around the product for ventilation. Do not place product in or on a bed, rug, in a bookcase or cabinet that may prevent air flow through vent openings.
Page 7
Microphone Charging indicator For voice input. S hows the batter y's charge status. MicroSD card slot - Red: Charging Accepts microSD card (up to - Green: Fully charged 128GB). - Red (blinking): Low battery. HDMI port Power / Standby button Connects to a TV or a display Press to enter standby/wake up device.
Page 8
Laptop docking / undocking The keyboard connects to the Laptop via the Connector. When the connection is successful: • If the unit is in PC mode, it will automatically adjust its settings to use the keyboard. • If the unit is in Tablet mode, the message box "Do you want to exit tablet mode?" will display on the bottom of the screen.
Charging your Laptop IMPORTANT! Please Read. We recommend fully charging your Laptop before using it for the first time. For optimum performance, please connect the provided AC adaptor to your Laptop when it falls below 20% charge. The Laptop can be used only the provided AC Adaptor ( Zhuzhou Dachuan Electronic Technology Co., Ltd., model no.
Page 10
In order to keep the battery working in best condition, please pay attention to the following: • The included AC adaptor is for use with this unit only. Do not use it with other equipment. • Please do not charge the battery in high temperatures. •...
Starting for the first time When using the Laptop for the first time, you will be required to setup the following: Press and hold the Power button on your Laptop until the ONN logo appears. Select your desired language, then tap Follow the onscreen instructions to configure your Laptop.
Page 12
Turning off your Laptop a: In PC mode: Tap the icon in the lower-left corner of the screen or click Start key on the keyboard to go to the Start menu. b: In Tablet mode: Power icon in the lower-left corner of the screen, it will display 3 options (Sleep, Shut down and Restart).
Page 13
Put your Laptop to sleep You can put your Laptop to Sleep mode by doing either of the following: • Go to the Windows start menu or the Tablet mode and tap Power in lower- left screen, select Sleep and tap it. •...
Basics Gestures for the Touchscreen Here are some basic procedures for interacting with the touchscreen. Left edge swipe Right edge swipe Sw i p e f ro m t h e l ef t e d g e of t h e Swipe from the right edge of the screen screen to shuffle your running apps.
Page 15
Tap/Double tap Touch & Hold T o s e l e c t a n i t e m o n t h e To m o v e a n a p p, t o u c h a n d h o l d touchscreen, lightly tap it.
Using the Trackpad Use the Trackpad to move the cursor or select an item. The left and right buttons of the Trackpad act the same as the left and right buttons of a mouse. Left-click Right-click • In the Start menu, click an app to •...
Page 17
Two-finger scroll (up/down) Two-finger scroll (left/right) Slide two fingers to scroll left or right. Slide two fingers to scroll up or down. Zoom out Zoom in S p re a d t wo f i n g e rs a p a r t w h i l e P i n c h t wo f i n g e rs w h i l e v i ew i n g a viewing a website, map, or image.
Start Menu Microsoft Windows 10 is a new operating system that is used to control a computer. Tap the icon in the lower-left corner of the screen to get to the Start menu. You can also open the Start menu by pressing the Start key on the keyboard.
Page 19
Live Tiles on the screen change and update in real time so you can get real-time updates about news or sports, check what your friends are up to, and get the latest weather forecast. Expand Tap this icon in the upper-left corner of the screen to expand the START menu. Account options Tap on your account name to change account settings, lock your device or sign out of your account.
Page 20
Taskbar The below table lists some of the frequently used icons in the Taskbar: Icon Description Shows the battery status. Displays when a Wi-Fi network connected. Displays when Wi-Fi is turned on but there is NO a Wi-Fi network connection. Displays when Wi-Fi is turned off.
Action Center It allows you to receive system notifications, such as updates. It also has a really useful Quick Actions on the bottom. Checking notifications Tap the icon in the lower-right corner of the screen to launch the ACTION CENTER screen. All messages appears in the Action Center and you can select and tap them to read.
Tip: You can go to Settings -> System -> Notifications & actions to set the Notifications and Actions. NOTE • Select Expand or Collapse to expand or minimize the Quick Actions menu. Power Management When the apparatus is not connected power adaptor and not providing the main function or when other energy-using products are not dependent on its function, the default system settings and its characteristics enable the apparatus to activate display sleep mode within 5 minutes of user inactivity, and to activate a...
Page 23
Go to Settings -> System -> Power & sleep to manage how your Laptop use power.
Connections and Setup Inserting a microSD card Insert the microSD card into the Laptop’s microSD slot until it clicks. To check the storage of the microSD card, go to Settings -> System -> Storage. Remove the microSD card by pushing in on the card's edge. The card will pop out and can be removed.
External display You can connect the Laptop to an external display device. The cables required to connect an external display are sold separately. Connecting to a display 1. Connect the Laptop to a TV or other display device using an HDMI cable (not cluded) through the Mini HDMI port.
Page 26
3. Go to Action Center menu, select and tap Project. Select your desired mode as following: PC screen only Shows the screen on the Laptop only.
Page 27
Duplicate Shows the screen on both the Laptop and the external display. Extend Extends the screen to the external display. Second screen only Shows the screen on the external display only. Tip: You can also select the dual view (extend) mode. Go to Settings -> System -> Display, and select Detect on the Multiple displays option.
Page 28
Connecting to a Wi-Fi network Connect the Laptop to a wireless network to use the Internet. 1. On the Taskbar, select and tap Access Point (AP) list...
Page 29
2. Select a network from the list of detected wireless networks and select Connect automatically -> Connect 3. Enter the Access Point's password, if necessary, and select Next. Tip: You can also go to Settings -> Network & Internet -> Wi-Fi, tap it to On. NOTE •...
Airplane mode The Airplane mode disables the wireless connection, allowing you to use your Laptop safely while in-flight. If you see icon displayed in the lower-right corner of the screen, the Airplane mode is on. You should turn off the Airplane mode to enable the wireless network. 1.
Page 31
Bluetooth You can use Bluetooth to communicate between the Laptop and other Bluetooth devices, such as a smartphone. Go to Action Center menu, select and tap Bluetooth to turn it on. Then the Laptop will be a discoverable bluetooth device and you can scan it on your other bluetooth device.
Page 32
Brightness You can adjust the brightness level of the screen accroding to your requirements. Using the keyboard to adjust brightness Press the F2 key on the keyboard to decrease the brightness of the computer screen. Press the F3 key on the keyboard to increase the brightness of the computer screen. Using the taskbar to adjust brightness Tap the icon in the lower-right corner of the screen to launch the ACTION...
Page 33
Volume You can adjust the system volume or sound volume when playing music or video. Using the keyboard to control volume Press the F5 key on the keyboard to decrease the sound volume. Press the F6 key on the keyboard to increase the sound volume. Using the taskbar to control volume on the Taskbar, then drag the adjustment bar to your desired volume.
Troubleshooting When a problem occurs with the Laptop, it is easy to restore the Laptop to the factory default settings. Back up important data regularly before a problem occurs with the Laptop. You can go to Settings -> Update & security -> Recovery to recover your Laptop. Reset this PC If your PC isn't running well, resetting it might help.
Page 35
FAQs 1. Do I need to charge my tablet before first use? Yes, it’s highly recommended to fully charge the tablet before the initial use. Using the provided AC adapter connect the cable end to the tablet, and then plug the charger in to a standard wall outlet.
Page 36
4. How do I change the displayed language? Navigate to your tablet’s settings and select “Time and Language”. Then, choose your region and language. You may also “Add a language” and scroll through a list of available languages. Once selected, the language will be added to the system automatically. 5.
8. How do I insert and remove the tablet from the keyboard case? To remove the tablet, simply hold the keyboard portion of the case and lift the tablet from either the top right or top left edge. It should come apart very easily. To reattach the tablet, align the pin connectors on the keyboard to the bottom edge of the tablet.
Copyright and Trademark Notices Intel, the Intel logo and the Intel Inside logo are trademarks of Intel Corporation in the U.S. and/or other countries. Windows and windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
Limited Warranty Manufacturer warrants this product against defects in material or workmanship for a period of one (1) year from the original date of purchase. During this period, Manufacturer will replace a defective part with a new or refurbished part without a charge to you. If your unit is deemed unrepairable, the unit will be replaced with a new or refurbished unit at manufacturer’s sole discretion.
Page 40
Please contact Customer Support directly at 1-877-252-6873. Hours of operation are from 9:00am to 6:00pm EST, Monday to Friday. You will be instructed on how your claim will be processed so have information available including date of purchase, serial number and the problem with the product.
Need help?
Do you have a question about the 100002435 and is the answer not in the manual?
Questions and answers
My notebook does not turn on
Your Onn notebook (part number 100002435) may not be turning on due to one of the following reasons:
1. Battery Issues: If the battery was fully drained, it might take a few minutes before the device can be powered on. Charging from 0% to 70% takes approximately 1.5 hours.
2. Over-Discharge Protection Mode: If the device has not been used for a long time, the battery might be in over-discharge protection mode, requiring a longer charging time before it can turn on.
3. UEFI Settings Change: If you recently changed the "Operating System" setting in the UEFI setup, the device may no longer boot properly, leading to a black screen.
4. Firmware or NVRAM Issue: If attempts were made to reset the NVRAM, but the device still only shows a black screen, the firmware might be corrupted.
To troubleshoot, try charging the device for at least 1.5 hours, resetting the UEFI settings (if possible), or seeking support for repair or replacement.
This answer is automatically generated
Our laptop 1766620 Onn-100002435 will NOT come on?
The Onn laptop model 100002435 may not turn on due to the following reasons:
1. Battery Over Discharge Protection Mode – If the laptop has not been used for a long time, the battery may be in over-discharge protection mode, requiring more time to charge before it can power on.
2. Fully Drained Battery – If the battery was completely drained, it may take a few minutes of charging before the laptop can be turned on.
3. Incorrect OS Selection in Firmware – Changing the OS selection setting in the Aptio Setup Utility to an unsupported option (e.g., Linux) may cause the device to become unresponsive.
To troubleshoot, ensure the laptop is charging properly, wait for sufficient charging time, and check the firmware settings if needed.
This answer is automatically generated
will not charge, flashing only never green. can battery be replace