External Display Issues; Usb Issues - Toshiba Hi-Speed Port Replicator III User Manual

External display issues

Refer also to your computer and monitor documentation.
Problem
External display does
not turn on
Display error

USB issues

Problem
USB device does not
work
Solution(s)
Press WIndows ( ) + P keys to change the
display setting. Choose a setting that displays
information to an external monitor. Refer to
your computer user's manual for more
information on display settings.
Make sure that the monitor's power switch is
on. Confirm that the monitor's power cable is
plugged into a live electrical power outlet.
Try adjusting the contrast and brightness
controls on the monitor.
Check that the cable connecting the monitor
to the port replicator is firmly attached.
If the problem persists, contact Toshiba
support. For contact information, please see
"If you need further assistance" on page 26.
This section refers to the TOSHIBA Hardware Setup
diagnostic utility. To learn how to access the TOSHIBA
Hardware Setup utility, please refer to your computer
user's guide.
Solution(s)
Check that the cable connection between the
USB ports on the port replicator and the USB
device is secure.
Make sure the USB device drivers are properly
installed. Refer to your operating system
documentation and the documentation that
came with your USB device for more
information.
External display issues
23