Undocking Your Computer - Toshiba Hi-Speed Port Replicator III User Manual

3 Press down on the back of the computer until it clicks
into place.
The computer connector on the port replicator engages
the computer's docking port.
When the computer is connected, the Docked light
glows green.
4 If the computer is not already on, press the
button on the port replicator to turn the computer on.
The power light on the computer will turn on, indicating
that the computer is receiving power.

Undocking your computer

The system supports hot docking and undocking.
Some models can only work with 180w port replicator.
Refer to your computer's online User's Guide for more
details.
You can leave your computer docked in the port
replicator overnight. Use the standard Windows
shutdown procedure, which will automatically power off
your computer. Press the power button on the port
replicator (or the computer's power button) when you are
ready to turn the computer on again.
Do not disconnect the computer from the port replicator
while an application is running. When the Docked light is
off, it is safe to disconnect.
Undocking your computer
17
Power
®