Canon PowerShot G3 X Manual page 4

NOTE
•
If you register a camera, that camera's name will appear on the screen in step 4. From the
second time onward, select the camera's name to make the connection.
5. The following screen appears.
Follow steps 1-4 on the target camera too.
Camera connection information will be added when [Start connection on target camera] is
displayed on both camera screens.
Once the other camera is registered, the screen for sending images will appear. For instructions
on how to send images, please refer to the explanations in step 7 and the subsequent steps.
6. Once both cameras are connected, a screen similar to the following one will be displayed.
NOTE
•
Once you have connected to devices via the Wi-Fi menu, recent destinations will be
listed first when you access the Wi-Fi menu. You can easily connect again by pressing
the [ ], [ ] buttons to choose the device and then pressing the [
new device, display the device selection screen by pressing the [
then configure the setting. If you prefer not to display recent target devices, choose
MENU > [ 4] tab > [Wi-Fi Settings] > [Target History] > [Off].
•
To send multiple images at once, repeat step 2.
] button. To add a
], [ ] buttons, and