Playback; Picture Scanning; Instant View; Still Picture - Philips VR175/05 Operating Instructions Manual

2.

PLAYBACK

1
Insert the cassette into the cassette slot.
2
Press the playback button
3
Picture scanning: Press the
(forward) button once or several times.
4
Interrupt: Press the
5
Wind and rewind: Interrupt the playback function and
H
press the (rewind) or
If, during wind/rewind, you want to have a quick access
to picture scanning, use the 'Instant View' function.
6
INSTANT VIEW: If you hold the
(Wind) button during wind or rewind, you will switch to
picture scanning. If you release the buttons, the video
recorder will automatically switch back to rewind or wind
again.
7
Eject a cassette: Interrupt the playback function and
hSTOP/JEJECT
press the
Notes: Some functions switch off automatically after a
while (e.g.: Pause, Still Picture, Scanning). This helps to
protect the cassette and prevent unnecessary power
consumption.
* The picture quality will deteriorate during Picture
Scanning. The sound is turned off.
6
PLAY G
.
H
(reverse) or
STOP h
button.
I
(wind) button.
0:20
H
(Rewind) or
button on the video recorder.

Still picture

1
Press the
Interference stripes will appear on the screen.
2
Each time you press
move on one step.
Note: If the still picture vibrates vertically, hold the
P r
or the
minimal. This setting will be stored automatically.
Please note, however, that interference may still occur
with poor quality cassettes.
I

Tape position/Index search

Tape position: The elapsed playback time, given to the hour
and minute, appears in the display.
If you want to set the indicator to '0:00' , press the
CLEAR (CL)
button.
When you insert a cassette, the indicator is automatically set
to '0:00' .
Index search: At the beginning of each recording, the video
recorder marks the tape with a code mark. You can search
for these code marks on the tape. Once the video recorder
finds the code mark or a blank space it will automatically
I
switch to playback.
1
Press the
button to select the next code mark or the
for the previous code mark.
Note: You cannot use the function 'Index search' with
recordings made on another video recorder that does
not have this code mark function.
STILL R
button. You see a still picture.
STILL R
again, the picture will
P q
1
button at step until the vibration is
INDEX E
button and then press the
I
H
button