White Color Temperature; Automatic Powersaving - Philips 107E21/25H User Manual

107E Product Information
VIDEO
• Video dot rate
• Input impedance
- Video
- Sync
• Input signal levels
• Sync input signal
• Sync polarities

WHITE COLOR TEMPERATURE

Chromaticity CIE coordinates:
• at 9300 degrees K
• at 6500 degrees K
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital
cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible
device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you
can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a
predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the
monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to
go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK
again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of
these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
For more information on sRGB, please visit:
* These information are subject to change without notice.
Automatic Power Saving
file:///D|/EDFU/crt_17/edoc/english/107E/PRODUCT/PRODUCT.HTM (2 of 4) [2003/11/3 ?? 01:12:13]
108 MHz
75 ohm
4.7 kOhm
0.7 Vpp
Separate sync
Positive and negative
x = 0.283 / y = 0.297
x = 0.313 / y = 0.329
www.srgb.com
RETURN TO TOP OF THE PAGE