GRAUPNER HoTT SMART-BOX Manual page 16

At a later date it will be possible to use the INC or DEC button in the model car display (CAR) to select
different vehicle-specifi c graphic displays.
Please read the corresponding section in the instructions relating to the sensors you are using.
Multiple sensors, for example GPS and General module, can be connected to the receiver via a Y-cable
order No. 3936.11 from software version V2.x or higher for the module, receiver and SMART-BOX.
Attention: When using the Y-cable plugged into the telemetry connector on the receiver for connecting
multiple sensors, only MODEL SELECT can be used, because only in this mode the sensors are addressed
correctly.
The SETTING AND DATAVIEW mode for programming can not be used!
First the sensors must individually programmed, for example directly with the SMART-BOX.
15
33700 SMART-BOX - Graupner HoTT 2.4