Configuration 1 Menu - Philips BDL6545AT/00 User Manual

User Manual BDL6545AT
5.2.5.

Configuration 1 MENU

Switch on state
Set the display to turn on or remain off when the power cord is connected to a wall outlet.
Use the UP/DOWN button to toggle between
• Last status - The display will return to the previous power status (on/off/standby) when removing and
replacing the power cord.
• Forced on - The display will turn on when the power cord is connected to a wall outlet.
• Power off - The display will remain off when the power cord is connected to a wall outlet.
Note: If you unplug the power cord and re-plug within 7 seconds, the display will not work under the selected setting.
Auto adjust
Note: For VGA input only.
Use this function to automatically optimize the display of VGA input image. Press the SET button to adjust.
Power save
Set the display to reduce the power automatically.
Press the UP/DOWN button to toggle between
• PC - Select On to let the display enter DPMS (Display Power Management Signaling) mode when no signal
can be detected from the HDMI, DVI-D, and VGA inputs after three successive cycles. Use the PLUS/
MINUS button to make selection.
• Video - Select On to let the display enter power saving mode when no signal is detected from the Video,
S-Video, and Component inputs after three successive cycles. Use the PLUS/MINUS button to make
your selection.
Language
Select the language for the OSD menu.
Use the UP/DOWN button to select a language.
Panel saving
Choose to enable the panel saving functions to reduce the risk of the "image persistence". Use the UP/
DOWN button to toggle between
• Cooling fan - Select Auto and the fan will turn on when the display gets to a certain level in order to
expel hot air and cool the unit. Select On/Off to keep the fan on/off. Use the UP/DOWN button to make
your selection.
Notes:
• When Auto is selected, the cooling fans will turn on when the temperature reaches 55°C (131°F) and will turn off
when the temperature has decreased to 50°C (122°F).
• The display will shut down automatically if the temperature reaches 82°C (179.6°F) no matter what settings have
been selected.
RETURN TO THE CONTENTS