Delivery; Scope Of Supply - nord NORDAC SK 5xxE Series Manual

NORDAC SK 5xxE Manual

1.2 Delivery

Check the equipment immediately after delivery/unpacking for transport damage such as deformation or loose
parts.
If there is any damage, contact the carrier immediately and implement a thorough assessment.

1.3 Scope of supply

Standard design:
Available accessories:
Technology unit,
Section 3.2:
10
Important! This also applies even if the packaging is undamaged.
IP20
Integrated brake chopper
Integrated EMV mains filter for limit curve A1 as per EN55011
(not for 115V devices)
Blanking cover for technology unit slot
Screening terminal for control terminals
Covering for the control terminals
Operating manual
Braking resistor, for energy feedback (Section 2.5.)
Interface converter RS232 → RS485 (additional description BU 0010)
NORD CON, PC parameterising software
ePlan macros for producing electrical circuit diagrams
EMC Kit (SK EMC 2-1, SK EMC 2-2) Section. 2.4
SK CSX-0, SimpleBox,
removable operating panel, 4 digit 7 segment LED display, single button control
SK TU3-CTR, ControlBox,
detachable operating panel, 4 figure 7 segment LED display, keyboard
SK TU3-PAR, ParameterBox,
removable control panel, multi-line plain language LCD display, keyboard
SK TU3-PBR, Profibus, additional unit for Profibus communication (1.5Mbaud)
SK TU3-PBR-24V, with external 24V supply(12Mbaud)
SK TU3-CAO, CANopen, bus switch-on
SK TU3-DEV, DeviceNet, Bus switch-on
SK TU3-IBS, InterBus, Bus switch-on
SK TU3-AS1, AS interface
SK TU3-POT, PotentiometerBox,
removable control panel for control with a potentiometer and two buttons
NOTE: Additional BUS descriptions are available (BU 0020... BU 0090)
Subject to technical alterations
> www.nord.com
>
www.nord.com
<
> www.nord.com <
BU 0500 GB