Appendix A - Multi Remote Controls Support - Philips 32HF7965D/27 User Manual

Appendix A – Multi Remote Controls Support
Programming the Multi Remote
Controls function
Multi RC function supports up to four
TV sets operating in one room without
any interference from each other remote
controls. Each Guest Remote Control must
be programmed individually to one of the
four color (Blue, Yellow, Green and Red)
buttons on the remote control.
1. Press the button on the GREEN
remote control to activate the TV
SETUP Menu.
Press the > button to select
2.
COMMUNICATION.
SETUP
LANGUAGE
COMMUNICATION
CHANNEL INSTALL
AUTO INSTALL TV
CABLE TUNING
USE CHANNEL TABLE
CURRENT RING
DIGITAL SETUP
CONFIGURATION
3. Press the > button to enter the
COMMUNICATION menu.
COMMUNICATION
COMMUNICATION
STORE
REMOTE CONTROL
4. Press the > button repeatedly until
MULTI RC is selected.
Press the > button to select
5.
REMOTE CONTROL.
36
6.
7.
ENGLISH
8.
>
>
>
NO
NO
RING1
>
>
MULTI RC
>
BLUE
9.
COMMUNICATION
COMMUNICATION
STORE
REMOTE CONTROL
Press the > button repeatedly to toggle
through the four colors and select your
preferred color.
Press the < button to select STORE
and press the > button to store your
selection. Press the
menu.
Using the Guest Remote Control, press
the MENU and the YELLOW buttons
simultaneously to set the remote control
to the corresponding color that you
have selected in the REMOTE
CONTROL option. If BLUE color is
selected at the REMOTE CONTROL
option, correspondingly, you must select
BLUE color button on the Guest
Remote Control.
You can now use the Guest Remote
Control to operate the TV set.
To check whether you have
programmed the MULTI RC function
correctly, press the OK button on the
Guest Remote Control for five seconds.
Information of the Remote Battery,
Remote Color and the TV Color will
be shown on the screen. If the Remote
Color and the TV Color do not match,
you need to re-programme and ensure
they match to enable the Guest Remote
Control to operate the TV.
MULTI RC
>
YELLOW
button to exit