Blaupunkt HSB601 Owner's Manual page 7

HSB601
1. LED display
2. Switch button
3. Temperature change buttons
USE OF HAIR STRAIGHTENING BRUSH
1. Connect the appliance to a power source. Switch on the appliance by pressing the switch button
(2) for 3 seconds. Set the temperature from 160
buttons (3).
2. Hold the + button for 5 seconds to lock the buttons. Hold the + button for 5 seconds to unlock
the appliance.
3. The straightening brush becomes heated very fast. A chosen temperature will flash on the
display during heating. Having reached a desired temperature, the display will show the temperature
continuously. A given temperature is usually reached after 3 to 5 minutes.
4. Make sure that your hair is clean, well-combed and dry.
5. WARNING: The ionizing function is switched on automatically after switching on the appliance.
6. Move the brush along strands of hair until you obtain a desired effect.
7. WARNING: Vapour may be released during the hair straightening process. Such a phenomenon
occurs when your hair is not well-dried or covered with preparations such as hairspray, etc.
8. WARNING: The appliance switches off automatically after 60 minutes. In order to resume the
operation, switch off the hair straightening brush with use of the switch and switch it on again.
9. Having finished using the hair straightening brush, switch it off and unplug.
10. It is recommended not to comb your hair right after straightening. When your hair cools down,
the effect will be visible.
CLEANING AND MAINTENANCE
Check whether the brush is covered with hairs and remove them on a regular basis. Wipe the heating
surface of the hair straightening brush with a slightly damp cloth, then wipe until dry. Do not use any
sharp tools for cleaning; the appliance may be easily scratched. Do not immerse the appliance in water.
4. Ceramic combs
5. Ionizing channels
6. Rotatable supply with male connector
o o
C C
to 220 using the + and - temperature change
5