Table of Contents
Advertisement
Preset the picture format
1
Enter the Philips Hospitality setup menu.
2
to select CONFIGURATION > SWITCH ON / OSD >
Press
SWITCH ON PIC FMT.
3
Press to select one of the available picture formats:
» The selected picture format is used to display pictures when the
TV is turned on.
Select the switch-on channel
1
Enter the Philips Hospitality setup menu.
2
Press
to select CONFIGURATION > SWITCH ON / OSD >
SWITCH ON CHANNEL.
3
Press to display the selected channel when the TV is turned on.
Select the switch-on volume
1
Enter the Philips Hospitality setup menu.
2
Press
to select CONFIGURATION > SWITCH ON / OSD >
SWITCH ON VOLUME.
3
Press to set a volume that is used each time the TV is turned on.
Enable or disable the volume indicator
1
Enter the Philips Hospitality setup menu.
2
Press
to select CONFIGURATION > SWITCH ON / OSD >
VOLUME INDICATOR.
3
Press to select one of the following:
•
YES: To display the volume indicator.
•
NO: To hide the volume indicator.
Select channel display
1
Enter the Philips Hospitality setup menu.
2
to select CONFIGURATION > SWITCH ON / OSD >
Press
CHANNEL DISPLAY.
3
Press to select one of the following:
•
NUMBER: To display the channel number on the screen.
•
LABEL: To display the channel name on the screen.
•
ALL: To display channel number, name and logo on the screen.
•
NONE: To prevent the display of channel information.
Select the switch-on power mode
1
Enter the Philips Hospitality setup menu.
2
Press
to select CONFIGURATION > SWITCH ON / OSD >
POWER ON.
3
Press to select the power mode that will be restored after an AC
power interruption.
•
LAST STATUS: When AC power is restored, this will return
the TV to the same power status that it was in when AC power
was removed.
•
ON: When AC power is restored, the TV will always come
up in the "on" state. The button on the TV and the guest
remote control are enabled.
•
STANDBY: When AC power is restored, the TV will always
come up in the "Standby" state.
•
FORCED ON: When AC power is restored, the TV will always
come up in the "on" state. The button on the TV and the
guest remote control are disabled (The TV cannot be turned
off.)
Configure the picture and sound settings
1
Enter the Philips Hospitality setup menu.
2
Press
to select CONFIGURATION > PICTURE / SOUND.
PICTURE / SOUND
BRIGHTNESS
COLOR
CONTRAST
SHARPNESS
TINT
ACTIVE CONTROL
TREBLE
BASS
BALANCE
AVL
3
Press
to select one of the following options:
•
BRIGHTNESS: To adjust the black level of the image.
•
COLOR: To adjust the color.
•
CONTRAST: To adjust the peak bright areas of the image.
•
SHARPNESS: To adjust the image sharpness.
•
TINT: To adjust the color balance in an image.
•
ACTIVE CONTROL: Select ON to fine-tune the received
signals according to the lighting conditions of the room.
•
TREBLE: To adjust the treble level.
•
BASS: To adjust the bass level.
•
BALANCE: To adjust the balance of the speakers.
•
AVL: Select ON to reduce the fluctuations in volume when the
commercials are aired or when you switch channels. Otherwise,
select OFF.
45
38
70
50
36
YES
52
55
0
ON
EN
15
Hide quick links:
Advertisement
Table of Contents
