Philips SLA5520/00 User Manual page 24

Group
EN
Configuration wizard Select network settings Automatic (DHCP)
User settings
24
Details
Manual (Static IP)
Product ID (IP) ***.***.***.***
<Change>
Subnet mask ***.***.***.***
<Change>
Gateway ID (IP) ***.***.***.***
<Change>
DNS server preferred ***.***.***.***
<Change>
DNS server alternate ***.***.***.***
<Change>
Apply settings Yes
No
Save to profile Profile 1
Profile 2
Profile 3
Primary user Add user
Remove user
Guest user 1
Guest user 2
Explanation
Preferred - A product identification number
(IP address) can be assigned to the SLA5520.
It is used for communication on the network.
It can be assigned by a DHCP server.
DHCP - Dynamic Host Configuration Protocol
Only for experienced users - The product
identification number (IP address), Netmask,
gateway and preferred DNS server must be
entered manually.
Confirm the product identification number
(IP address) assigned to the SLA5520.
Enter the product identification number.
Confirm the subnet mask. Is must be the same
on all devices in the network.
Enter the subnet mask.
Confirm the product identification number
(IP address) of the gateway. The gateway
address is most often the same as the address
of the base station, router or access point.
Enter the product identification number
(IP address) of the gateway.
Confirm the product idenfication number
(IP address) of the preferred DNS server.
The preferred DNS server address is most
often the same as the address of the base
station, router or access point.
Enter the product idenfication number
(IP address) of the preferred DNS server.
Confirm the product idenfication number
(IP address) of the alternate DNS server.
Enter the product idenfication number
(IP address) of the alternate DNS server.
Save the configuration settings.
Discard the configuration settings.
1 Select the security code index (WEP key
index)
2 Press 2 or OK.
Add a guest user. The e-mail address and
(optional) a password must be entered.
Select the user to remove. Confirm with the
password of the primary user.
Load the preferred settings of the first
guest user.
Load the preferred settings of the second
guest user.