Table of Contents
Advertisement
Group
EN
Device status
Configuration wizard Load profile
22
Details
Gateway ID (IP)
DNS server preferred
DNS server alternate
Proxy server
Proxy hostname
Proxy port
Profile 1
Profile 2
Profile 3
Only available when Advanced settings - Profile management is enabled.
Select network
Network 1 (SSID)
Network 2 (SSID)
Other (Advanced)
Select wireless mode
Network (Infrastructure)
Point to point (Ad-Hoc)
Explanation
A piece of software running on a base station (router) or
PC that translates local network communication to
internet communication.
The DNS server preferred is the product identification
number (IP address) of the preferred DNS server.
DNS server - A piece of software running on a base
station (router). It translates requests for internet pages
for the Internet Service Provider.
The DNS serveralternate is the product identification
number (IP address) of the alternate DNS server.
Defines whether a proxy server is required.
Either - The proxy hostname defines the product
identification number (IP address) of the proxy
server.
Or - The proxy hostname defines the web-address
(URL) of the proxy server.
The proxy port defines the entrance to send requests to
the proxy server.
Range - 0 to 65535
1 Select the profile you wish to load.
2 Press 2 or OK.
The values in the profile are activated.
1 Either - Select the network to which
the SLA5520 should connect.
Or - Select Other (Advanced) to enter the
network name (SSID) manually.
2 Press 2 or OK.
Preferred - devices communicate via the base
station, router, gateway or access point.
Example - Philips base station (with Internet
access), PC with wireless built-in and Philips
SLA5520.
Only if none of the following devices is
available: base station, router, gateway or
access point.
Devices communicate directly to each other.
Example - PC with wireless built-in and
Philips SLA5520
Advertisement
Table of Contents
