Installation Information - impro XTT901 Installation Manual

Keypad
XTT904, HRL906 XTT907 .....
XTT905, XTT952 & HRL904 ..
Status Indicators
Status LED .............................

INSTALLATION INFORMATION

Accessories
Find the following when unpacking the Antenna Reader:
XTT901 to XTT904, HRL906, HRL900 to HRL 902, XTT907, XTT951,
HRL903, XTT952 and HRL904
Either an Impro MMA Antenna Reader (XTT901-1-0-GB-XX, HRL900-1-0-GB-XX)
•
housed in a Dark Grey, ABS Plastic housing. The Impro MMA consists of a Front
Cover and a Backing Plate. The Front Cover (including the potted electronic
components) assembly includes 8 m (26 ft) of 4-core, 0.5 mm solid strand
Communications Cable.
Or an Impro MA Antenna Reader (XTT902-1-0-GB-XXl, HRL901-1-0-GB-XX)
•
housed in a Dark Grey, ABS Plastic housing. The Impro MA consists of a Front
Cover and a Backing Plate (the Backing Plate is attached with a Self-tapping
Screw (M2 x 6 mm)).
Or an Impro MHA Antenna Reader (XTT903-1-0-GB-XX, HRL902-1-0-GB-XX)
•
housed in a Zinc alloy die-cast housing. The Impro MHA consists of a Front Cover
and a Backing Plate (the Backing Plate is attached with an M3 x 8 mm screw).
• Or an Impro KHA Antenna Reader (XTT904-1-0-GB-XX, HRL906-1-0-GB-XX)
housed in a Zinc alloy die-cast housing. The Impro KHA consists of a Front Cover
and a Backing Plate (the Backing Plate is attached with an M8 x 8 mm screw).
Or an Impro KA Antenna Reader XTT907-1-0-GB-XX) housed in a Dark Grey,
•
ABS Plastic housing. The Impro KA consists of a Front Cover and a Backing Plate
(the Backing Plate is attached with a Self-tapping Screw (M3 x 8 mm)).
Or an Impro AMR Antenna Metal Reader (XTT951-1-0-GB-XX, HRL903-1-0-GB-
•
XX) housed in an ABS Plastic and 304 Stainless Steel housing. The Antenna
Reader consists of a Front Cover assembly and a Backing Plate (the Backing
Plate is attached with an M8 x 8 mm screw).
Or an Impro AMK Antenna Metal Keypad Reader (XTT952-1-0-GB-XX, HRL904-1-
•
0-GB-XX) housed in an ABS Plastic and 304 Stainless Steel housing. The
Antenna Reader consists of a Front Cover assembly and a Backing Plate (the
Backing Plate is attached with an M8 x 8 mm screw).
An extra an M8 x 8 mm screw (XTT903-1-0-GB-XX, HRL902-1-0-GB-XX
•
XTT904-1-0-GB-XX, HRL906-1-1-GB-XX, XTT951-1-0-GB-XX, HRL903-1-0-GB-
XX, XTT952-1-0-GB-XX and HRL904-1-0-GB-XX models only).
An extra Serial Number Label.
•
XTT301-0-0-GB-20
12 Alphanumeric keys.
12 Numeric keys.
Bi-coloured Red or Green (externally visible).
March 2019 Page 2