Mount the network
Find a proper location to mount the networks.
Mount the networks onto the car with the supplied screws.
Connect the woofer/tweeter to the network
Match the "left", "right", "+" and "-" terminals correctly. Revised polarity may
degrade sound quality.
Two 4-ohm speakers, wired in stereo, present a 4 ohm load to each channel
of the amplifier. Most two channel amplifiers work well in this configuration.
However, if two 4-ohm speakers, wired in parallel to a bridged two -channel
amplifier, present a 2-ohm mono load to the amplifier. Most 2-channel
amplifiers do not support 2-ohm mono operation! Amplifier damage may
Connect the woofers and the tweeters to the 2-way crossover
network first, then connect the network to your amplifier or
car audio directly.