TC Electronic Vintage Bass Distortion User Manual page 2

Hide thumbs Also See for Vintage Bass Distortion:

INTRODUCTION & CONNECTIONS

Introduction

Congratulations on the purchase of you new Vintage Bass Distortion

pedal from TC Electronic. The Vintage Bass Distortion will add that

extra punch and roar to your bass you need when your sound is just

too clean and anonymous. Used with subtle or more radical settings the

Vintage Bass Distortion will give you awe-inspiring controlled distortion

or drive that preserves your natural musical expression while adding

your choice of hurling fuzz to the bottom. Apply grandiose sustain in

normal mode, enriching the overtones and enlarging the bottom.

Engage the boost for additional distortion and you're on the highway to

Fuzz'n'Buzz Eldorado. Control the blend of distortion and your original

tone with the Mix Factor knob and use the Color filter to change the

sonic structure of your sound.

Connections

Input - 1/4" connection for input signal. Connect your guitar here.

Output - 1/4" connection for output. Connect the output to your amp or

mixer.

LED - On/Off indication.

Vintage Bass Distortion