IBM 5251 Series Maintenance Information Manual page 143

How to use this display:
If you only want to look at the error tables on the
display screen:
1 . Press the 1 key.
2. Press the Enter key.
If you want a printout of the error tables:
1. Press the 2 key.
2. Press the Enter key.
xx---xx
(station 10) can be up to
10
characters.
,.. ERROR RECORDING ANALYS IS PROCEDURE.
ENTER 10 OF DESIRED DEVICE XX---XX
SELECT ONE OF THE FOLLOWING FUNCTIONS
ENTER I D OF PRINTER TO RECEIVE OUTPUT
PRINTERS ON THE SYSTEM
xx---xx xx---xx xx---xx
SELECT DES IRED OPTION 08
xx---xx
(station 10) can be up to
10
characters.
Now: This screen will be seen only if you select
the print option
Maintenance Procedures 5251 MIM 1-125
••••••
I' . .