IBM 5251 Series Maintenance Information Manual page 142

Descriptions of the ERAP options are:
• If you select the END option, the ERAP function will
be terminated. If you select this option and press the
Field Exit key, the display returns to the sign-on
menu.
• If you select the ALL option, the ERAP tables will be
displayed one at a time for all devices on the line.
When the error history table for the first device is
displayed and the Enter key is pressed, the I/O
counter table for the second device will be displayed.
This sequence will be repeated until the error history
table for the last device on the line is displayed.
,...
1-124
• If you select the workstation controller option, the
display stations option, or the 5256 printers option,
you must also select a particular device. The I/O
counter table, the error counter table, and the error
history table will be displayed for the selected device
only.
This manual describes only the display stations option.
ERROR RECORDING ANALYSIS PROCEDURE. SELECT DESIRED OPTION 08
ENTER ID OF DESIRED DEVICE
xx---xx xx---xx xx---xx
xx---xx
(station 10) can be up to
10
characters.
Select the display stations option by:
1. Pressing either the 1 key or the 8 key, depending
on the displayed menu.
2. Pressing the Field Exit key.
How to use this display:
1. Enter the I D of the desired device.
2. Press the Enter key.
206