Mounting And Wiring; Recommended Mounting Rails; Dimensions; Fig. 10 Dimensions - Beckhoff KM2604 Documentation

Mounting and wiring

3 Mounting and wiring
3.1

Recommended mounting rails

Terminal Modules and EtherCAT Modules of KMxxxx and EMxxxx series, same as the terminals of the
EL66xx and EL67xx series can be snapped onto the following recommended mounting rails:
• DIN Rail TH 35-7.5 with 1 mm material thickness (according to EN 60715)
• DIN Rail TH 35-15 with 1,5 mm material thickness
Pay attention to the material thickness of the DIN Rail
Terminal Modules und EtherCAT Modules of KMxxxx and EMxxxx series, same as the ter-
minals of the EL66xx and EL67xx series does not fit to the DIN Rail TH 35-15 with 2,2 to
Note
2,5 mm material thickness (according to EN 60715)!
3.2

Dimensions

Fig. 10: Dimensions
Width of a bus terminal block
Note the maximum number of Bus Terminals
The maximum number of Bus Terminals or terminal modules that can be connected to a
Bus Coupler is 64!
Attention
An overall width of 80 cm must not be exceeded!
Also ensure that the current consumption of the Bus Terminals/terminal modules from the
K-bus does not overload the K-bus power supply of the Bus Coupler.
14 Version: 2.1.0 KM2604 and KM2614