Download  Print this page

Install Remote Control Battery; Turn On - Philips CEM2000X/78 User Manual

Car audio system usb/sd cd
Hide thumbs

Advertisement

8
Reconnect the negative terminal of the
car battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.

Install remote control battery

Caution
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
Risk of decreased battery life! Never mix
different brands or types of batteries.
Risk of product damage! When the remote
control is not used for long periods, remove
the batteries.
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
For first-time use:
1
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

1
Press
to turn on the unit.
To turn off the unit, press
3 seconds.
for over
EN
13

Advertisement

Table of Contents
loading

  Also See for Philips CEM2000X/78

  Related Manuals for Philips CEM2000X/78

This manual is also suitable for:

Cem2000