Get Started; Install The Car Audio - Philips CE130/51 User Manual

g OPTIONS/CLOCK
• Access option menu.
• View clock.
h
/
• Tune for radio station.
• Skip/search for track.
• Fast forward/backward playback.
i DISP
• Display current status.
j MENU
• Access system menu.
k
/
• Turn the unit on or off.
• Confirm selection.
• Mute or unmute sound.
• Rotate to adjust settings.
l EQ AUDIO
• Select equalizer (EQ) setting.
• Access audio setting menu.
m SOURCE
• Select audio source.
n ZONE
• Switch the music listening zone.
o DBB
• Turn on/off Dynamic Bass Boost
(DBB) sound.
p RESET
• Restore default settings.
q SD card slot
8 EN

3 Get started

Caution
• Use the controls only as stated in this user
manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus. The
model number and serial number are on the
bottom of your apparatus. Write the numbers
here:
Model No. __________________________
Serial No. ___________________________

Install the car audio

These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
Caution
•
This unit is designed for negative ground
(earth) 12 V DC operation only.
• Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
•
To avoid short-circuit: before you connect,
ensure that the ignition is off.
•
Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
•
Ensure that all loose leads are insulated with
electrical tape.
•
Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
• Ensure that all ground (earth) leads are run to
a common ground (earth) point.
•
Use only the supplied mounting hardware for a
safe and secure installation.
•
Improper fuses can cause damage or fire.
When you need to change the fuse, consult a
professional.