Driver Software Installation -
1.First connect the USB232B converter into your PC's USB port.
2.Insert the USB232B driver software coded at DISK5277 set up CD
into the CD-ROM drive of your computer .The setup program will
begin to run automatically .
3.Then first time you use the Disk5277 , you will need to install the
said disk by twice operations. One is "Universal Serial Bus
Controllers" driver ; the other is COMPORT driver.
You will be prompted by following screen shots to complete
the task.
1. What do you want Windows to do ?
2. Select Searching locations for new driver
Select this
Installation
Select this
Click Next
- 3 -
Click Next