Related Manuals for AutoTest AUTOLIGHT PLUS
Summary of Contents for AutoTest AUTOLIGHT PLUS
- Page 1 User Manual Version 3.31 LIGHT AUTO PLUS L i g h t T r a n s m i s s i o n M e t e r 10242...
- Page 2 The light transmission value of the test sample is marked on the sample and should correspond to the reading of AutoLight Plus within the level of accuracy of the instrument.
-
Page 3: Operation
4. OPERATION 4.1 Operating Conditions and Set-up AutoLight Plus has a photocell built into the light sensor tube and a constant light source built into the light source tube. These components are fragile. Care should be taken when handling the unit and should not be dropped or violently shaken. Avoid taking measurements in strong sunlight as stray light may affect the reading accuracy. -
Page 4: Troubleshooting
6. CALIBRATION AutoLight Plus will require calibration at intervals of one year or as required by your local Authority. Calibration can only be carried out by AutoTest Products Pty Ltd or by an Authorised Service Centre. - Page 5 • Microsoft Word 2000 or later for report generation Install AutoLight Plus Download Software Insert the AutoLight Plus Download software CD into CD-ROM drive and run “Setup.exe”. Follow on screen instructions. You are now ready to download readings from your AutoLight Plus light meter.
- Page 6 Once your AutoLight Plus has been paired with your PC, discover the services of your AutoLight Plus meter using your Bluetooth Manger and connect to the Serial Port service. AutoLight Plus User Manual Version 3.31 Page 5...
- Page 7 Once your Bluetooth Manager has established a Serial Port connection, your Bluetooth manager will inform you of the COM port to which the light meter is connected. Note down this COM port as it will be used by the AutoLight Plus downloading software. Run the AutoLight Plus downloading application.
- Page 8 Plus downloading software is installed. Please note that AutoLight Plus automatically switches off after 60 seconds of inactivity and you will need to switch it back on if this occurs. Also note that steps 1 to 5 are only required to be followed for the first time.
-
Page 9: Warranty
To ensure prompt warranty service should it be required, please complete warranty registration form, and return to AutoTest Products Pty Ltd within 10 days of purchase of the product. AutoTest Products or an Authorised Service Centre warrants this product against defects in material and workmanship for a period of 12 months from the original date of purchase. - Page 10 Notes: AutoLight Plus User Manual Version 3.31 Page 9...
- Page 11 AutoLight Plus User Manual Version 3.31 Page 10...
- Page 12 Copyright 2013 AutoTest Products Pty Ltd ABN 47 005 712 005. denotes a trademark owned by AutoTest Products Pty Ltd ABN 47 005 712 005 TEST AUTO Products Pty Ltd 61-63 Parsons St Kensington VIC 3031 Australia Phone: (+61 3) 8840 3000...
Need help?
Do you have a question about the AUTOLIGHT PLUS and is the answer not in the manual?
Questions and answers